Axis Q7900 Rack Guide D'installation page 13

AXIS Q7900 Installation Guide Page 13
Replacing a fan
Power connector
Screws
Follow these steps to replace a fan.
1. Loosen and remove the screws located on each side of the fan that needs to be replaced.
2. Gently pull out the fan far enough to disconnect it from the power connector.
3. Disconnect the fan and remove it completely.
4. Insert a new fan and reconnect it to the power connector.
5. Replace and retighten the screws.
Note:
If one fan needs to be replaced, it is best to replace all three fans as soon as possible for optimum
performance.