Clean Rinse; Water Cleaning And Water Handling (Optional); Technical Specifications - Hedson GP 24 Manuel D'utilisation

16. CLEAN RINSE

The GP-24 is equipped with an extra cleaning feature,
rinsing the wheels with clean tap water after finished
wash cycle and before blowing starts.
If the Clean Rinse option is being used in the machine,
the water change intervals may be increased to
approximately 400 washes.
Clean Rinse can be turned off, see chapter 11.4.
17. WATER CLEANING AND WATER
HANDLING (OPTIONAL)
The dirt on the wheels that are washed in a Hedson
wheel washer is the dirt from our roads and cars. This
dirt might also contain heavy metal residuals, especially
copper from the brakes, zinc and nickel. The permitted
limit values differ locally. Please contact your local water
authority about the handling of the waste water.
The waste water from this machine should be let out
through an oil separator. If required, the machine can
be equipped with an environmentally friendly water
cleaning and filtering system.
Hedson Technologies AB has developed an easy and
effective waste water cleaning method. The method
consists of a coagulation powder (art.no. R12076) that
is added into the machine while stirring the water. The
coagulation powder binds the heavy metal particles
through flocculation and these bigger particles can be
filtered away (art.no. R12037 hose filter and
art.no. R12038 basket filter). The purified water fulfils all
limit values and authority requirements.
When using equipment that handles warm water, there
is a risk of harmful bacterium emerging (water- and/or
airborne diffusion), especially if the water has been left
non-operative in the machine for a while. We therefore
recommend the following procedures:
• By adding a bactericide to the water in the washing
compartment (art.no. 230521, 2 litre per 300 litre
water)
• To empty out the water of the machine when not
using it.
PLEASE NOTE: BIO-291 or any other detergent must
not be used in the machine when using the Hedson
water cleaning method!
Contact your local sales rep. for information.
230754-EN rev.1 2016-10-18
GP 24

18. TECHNICAL SPECIFICATIONS

Producer:
Machine model:
Voltage:
Frequency:
Current:
Power:
Fuse needed:
Compressed air connection: Min 8 bar (120psi)
Air consumption:
Water volume:
Water consumption:
Height of unit, closed lid:
Height of unit, open lid:
Width of unit:
Depth of unit:
Weight of unit:
Weight of trolley:
Maximum wheel weight:
Maximum wheel size:
Minimum wheel size:
Sound pressure level:
Assumes that no other electrical equipment is
1)
connected to this fuse.
HEDSON TECHNOLOGIES AB
Hammarvägen 4
SE-232 37 ARLÖV
SWEDEN
GP 24
400V 3~
50 Hz
16A
8 kW
16A B-fuse
1)
max 12 bar (174psi)
400L/min.
(during air blowing)
300 l (82 US-gallon)
app. 1L/washed wheel
1550 mm (61")
2360 mm (93")
1620 mm (64")
1100 mm (43")
320 kg (704 lbs) without
water or shot medium
56 kg per trolley
45 kg
800 x 350 mm (31"x14")
540 x 135 mm (22"x5")
79 dB(A)
measured at a distance
of 1 meter
11