Bar And Chain Combinations - Ryobi P25013 Manuel D'utilisation

Chain specifications: 1/4 in. pitch, low profile narrow kerf, .043 in. chain gauge, 7-tooth drive sprocket.
Length of Bar Guide Bar Part Number
6 in. 318908002
PROBLEM
Bar and chain Check chain tension for overtightened
running hot and condition
smoking.
Motor runs, Chain tension too tight.
but chain is not
rotating.
Check guide bar and chain assembly.
Check guide bar and chain for damage.
This product has a Three-year Limited Warranty for personal, family,
or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com

BAR AND CHAIN COMBINATIONS

TROUBLESHOOTING
CAUSE
or call (toll free) 1-800-525-2579.
Chain Part Number
318906002
Tension chain. Refer to Adjusting Chain Tension earlier
in this manual.
Retension chain. Refer to Adjusting Chain Tension
earlier in this manual.
Refer to Replacing Bar and Chain earlier in this manual.
Inspect guide bar and chain for damage.
16 - English
Drive Links
38
SOLUTION