FAULTS
In the case of a fault, error codes appear on the display to simplify local-
ising of the fault cause (see table).
WARNING!
– Do not use the massaging unit if fault codes are dis-
played.
WARNING!
– If a fault occurs, the fault code flashes in the display.
– If several faults occur, the fault messages are displayed alternately.
Note:
Certain fault reports can be switched off by pressing the
button.
The fault can be acknowledged by switching off the unit
(pull out the mains plug or switch off the main switch/fuse)
for one (1) minute in other cases.
– Inform our Customer Services department if the same fault code as
before is displayed again after pressing the button or switching the
unit back on.
34