Commissioning - Wellsystem Relax Instructions De Service

Operating instructions
7
8
9
10
5
11 12
4
1. Handle
6
2. Rubber blanket
3. Headrest
4. Frame
5. Operating panel
6. Slot for chip card
7. Display/clock
8. Button "Massaging time"
9. Button "Pressure"
10. Buttons "Type of massage"
1 2 3
11. Button "START STOP"
12. Air bleed valve
35117 / 0
Operating instructions

Commissioning

Sight check for leaks
The following work steps have to be carried
out:
1
1. Sight check for leaks. Do not operate the
system if water is leaking.
2. Switch on and wait until the preset water
temperature is reached – see Page 19.
3. If necessary, change the preset water tem-
perature – see Page 32.
4. Vent the tank approx. 3 days after start-up
– see Page 27.
Note:
After connecting, it takes approxi-
mately eight (8) hours for the unit
to reach operating temperature.
2
230 V
18
30251 / 0
35004 / 0