Wellsystem Relax Instructions De Service page 21

Operating instructions
Starting when using a chip card
– Set up the massage time – see Page 21.
– Insert chip card.
– Lay down on the unit.
– Press the start button . The program
stored on the chip card will run automatical-
ly.
– Adjust the massage pressure to your wish-
es – see Page 21.
20
Note:
Any massage time setting can be
entered prior to starting when us-
ing a chip card (up to the maxi-
mum default time permitted). The
massaging pressure can be de-
creased or increased at any time
whilst the unit is working.
The type of massage cannot be
changed!
30292 / 0
Starting from the coin unit
– Set the massaging time on the coin unit
(see Operating Instructions of the coin
unit).
– Lay down on the unit.
– Select the required type of massage (see
Page 21) or insert the chip card.
– Press the start button .
– Adjust the massage pressure to your wish-
es – see Page 21.