Télécharger Imprimer la page

Technoline WS6442 Mode D'emploi page 15

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
Press the -/MAX/MIN button again to view the MIN values of indoor and outdoor temperature and humidity.
Press the -/MAX/MIN button again to return to normal display mode.
Notes:
Press and hold the -/MAX/MIN button for 2 seconds to clear MAX and MIN values from memory.
The MAX/MIN values will also be automatically cleared at every midnight (0:00).
After 5 seconds without pressing a button the display will return back to the normal display mode.
Activate/deactivate HI/LO alert function
In normal display mode, press the ALERT button and outdoor "HI" will blink. Press +/HEAT/DEW button to activate the HI temperature
alert, press -/MAX/MIN button to turn off the HI temperature alert. Press ALERT button to confirm.
Outdoor LO flashes on the display. Press +/HEAT/DEW button to activate the HI temperature alert or press -/MAX/MIN button to turn off
the HI temperature alert. Press ALERT button to confirm.
Indoor "HI" flashes on the display. Press +/HEAT/DEW button to activate the HI temperature alert or press -/MAX/MIN button to turn off
the HI temperature alert. Press ALERT button to confirm.
Indoor LO flashes on the display. Press +/HEAT/DEW button to active the HI temperature alert or press -/MAX/MIN button to turn off the
HI temperature alert. Press ALERT button to confirm.
Notes:
If HI/LO temperature alert is turned off the icon OFF will show on the display.
Setting HI/LO alert values
Hold the ALERT button for about 2 seconds to enter the setting value of temperature alert. "HI" outdoor temperature flashes on the
display. Press and release +/HEAT/DEW and -/MAX/MIN button to adjust the value or hold the button for fast adjust during setting mode.
Press ALERT button to confirm.
"LO" outdoor temperature flashes on the display. Press and release +/HEAT/DEW and -/MAX/MIN button to adjust the value or hold the
button for fast adjust during setting mode. Press ALERT button to confirm.
"HI" indoor temperature flashes on the display. Press and release +/HEAT/DEW and -/MAX/MIN button to adjust the value or hold the
button for fast adjust during setting mode. Press ALERT button to confirm.
"LO" indoor temperature flashes on the display. Press and release +/HEAT/DEW and -/MAX/MIN button to adjust the value or hold the
button for fast adjust during setting mode. Press ALERT button to end the setting.
Backlight
Press the SNOOZE/LIGHT button to set backlight to HI/LO/OFF, if using adapter to power the station.
Press the SNOOZE/LIGHT button to activate backlight for 10 seconds, if using batteries and not adapter to power the station.
Low battery indicator
Battery icon by indoor temperature means to change batteries in the station.
Battery icon by outdoor temperature means to change batteries in the sensor.
Hereby, Technotrade declares that this product WS6442 is in compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU and ROHS 2011/65/EC. The original EU declaration of conformity may be found at:
www.technoline.de/doc/4029665064420
Specifications
Reception
Transmission frequency: 433 MHz
Maximum transmission power: 8 dBm
Indoor temperature
Operating temperature range = 0°C to 50°C (32°F to 122°F)
EN6

Publicité

loading