Technoline WS6442 Mode D'emploi page 11

Buttons
There are seven function buttons:
SET/RCC ALARM
ALERT CHANNEL
Functions

Year：2019-2099

Date/Month/Day

Indoor/outdoor temperature and humidity

Indoor/outdoor temperature and humidity trend

Low battery icon for station and sensor

24/12 hour selectable

Alarm and snooze function

Weather forecast: Sunny, Partly sunny, Cloudy, Rainy and stormy

Maximum and Minimum temperature/humidity

Seven languages for week (GER, FRE, ITA, DUT, SPA, DAN,ENG)

Time zone： -12/+12HR

DCF Radio clock receiver function

Backlight，HI、LOW、OFF

Heat index and dew point for outdoor

High/Low Temperature alert for indoor and outdoor

Close/Open window tips （When temperature between 20℃ - 25℃ and humidity between 40% -70% will display to open the window if not in
the range will display to close）

Moon phase

Can be connected to up to 3 outdoor sensors

Batteries base station(WS6442):

Batteries outdoor sensor(TX960-TH): 2 x AAA
Initial operation:

Connect the station with a household socket by using the adapter HX075-0500500-AG-001.

When the station is powered, all icons on the LCD display will light up for 3 seconds, and you will hear a beep tone.

The weather station will now start to make a connection to the outdoor remote sensor. This operation takes about 3 minutes an d is
displayed by a flashing reception RF antenna symbol in the "OUTDOOR" display area on the receiver.

Remove the outdoor sensor battery compartment cover and insert 2 x AAA batteries observing polarity [ "+" and "–" marks]. Then close the
battery compartment.

After station has created a connection to the outdoor remote sensor, it will then enter the radio control time reception mode.
Optional: batteries for back-up (no permanent backlight if used without power adapter)

Open weather station battery compartment cover.

Insert 3 x AAA batteries observing polarity [ "+" and " –" marks].

Close the battery compartment.
+/HEAT/DEW -/MAX/MIN
SNOOZE/LIGHT
3 x AAA
EN2