Displaying the Picture File on the Full Screen
Select the picture file and "Full Screen", then press the ENTER key.
The selected picture is displayed on the full screen.
When you want to start the slide show from the selected picture, press the
following keys.
,/m: to display the next slide (the index screen is displayed after the last
</M: to display the previous slide (the index screen is displayed after the
MS SLIDE/ENTER: to return to the index screen
Protecting an Important File
After selecting the file you want to protect, set "Protect" to "On" or "All
On". When a file is protected, the protect mark is displayed.
Rotating a Picture File
After selecting the file you want to rotate, set "Rotate". The picture rotates
90° every pressing of the ENTER key.
Registering a File as the Startup Picture
You can register a picture file in the Memory Stick as the startup picture
file which is displayed when the power is turned on.
Set "Str. up" to "Entry". When the file is registered, the startup mark is
displayed.
When you want to use the registered picture file as the startup file, set
"Startup" of the SETTING screen to "Custom" (see page 20.)
Note
As the setting of "Custom" is memorized in the Memory Stick, when you
want to use the registered picture file as the startup file, insert the Memory
Stick in the projector before turning on the projector.
Deleting a Picture File
You can delete the selected picture file or all picture files of the selected
contents.
1
Select "Delete", then press the ENTER key.
2
Select the item, then press the M key to delete the file(s).
Sel. Img.: delete the selected picture file
All Img.: delete all picture files of the selected contents
Close: when you do not delete the file
18
GB
Operating the Picture File
picture file.)
first picture file.)