Connecting The Appliance To The Home Connect™ App; Checking The Signal Strength; Installing Updates For The Home Connect Soft- Ware; Resetting The Home Connect™ Settings - Bosch B36CT Série Manuel D'utilisation

a If the connection is successful,
menu setting display.
If the submenu display shows
5.
able to establish a connection to the WLAN home net-
work (Wi-Fi).
Check whether the appliance is located within the
‒
range of the WLAN home network (Wi-Fi).
→ "Checking the signal strength", Page 17
Repeat the process.
‒
10.3 Connecting the appliance to the
Home Connect™ app
If you have automatically connected your appliance to
your WLAN home network (Wi-Fi), you can connect your
appliance to the Home Connect™ app.
Requirements
¡ The appliance is connected to the WLAN home network
(Wi-Fi). → Page 16
¡ The Home Connect™ app has been installed on your
mobile device.
Press .
1.
lights up and the submenu display shows
a
Press / (Submenu) repeatedly until the submenu
2.
display shows and the submenu setting display
shows .
Press (Submenu setting).
3.
a The submenu setting display shows an animation.
Follow the instructions in the Home Connect™ app until
4.
the process is complete.
a If the connection is successful, the submenu setting dis-
play shows .
If the submenu setting display shows
5.
was unable to establish a connection to the Home Con-
nect™ app.
In the Home Connect™ app, check whether the mo-
‒
bile device is connected to the WLAN home network
(Wi-Fi).
Repeat the process.
‒
If the submenu setting display shows
6.
Home Connect™ settings. → Page 17
10.4 Checking the signal strength
You should check the signal strength if no connection
could be established.
Press .
1.
lights up and the submenu display shows
a
Press / (Submenu) repeatedly until the submenu
2.
display shows .
a The submenu display shows a value between setting
(no reception) and (full reception).
Press .
3.
Note: The signal strength should be at least .
Improving the reception
If the signal strength is too weak, the connection may be
interrupted.
Carry out one of the solution options:
▶
Place the router and refrigerator closer together.
‒
Ensure that the connection is not interfered with by
‒
screening walls.
flashes in the sub-
, the appliance was un-
⁠ .
, the appliance
, reset the
⁠ .
Install a repeater to strengthen the signal.
‒
10.5 Installing updates for the Home Con-
nect software
The appliance searches for updates to the Home Con-
nect™ software at regular intervals.
Note: If updates are available, the submenu display
shows .
To cancel the update and reset the submenu display to
the set temperature, press any touch field.
Press .
1.
lights up and the submenu display shows
a
Press / (Submenu) repeatedly until the submenu
2.
display shows and the submenu setting display
shows .
Press (Submenu setting).
3.
a The submenu setting display shows an animation.
a The update is installed.
a The control panel is locked during the installation.
a If the installation is successful, the submenu setting dis-
play shows .
If the submenu setting display shows
4.
was unable to install the update.
Repeat the process at a later point.
‒
If the update cannot be completed after several at-
5.
tempts, contact customer service → Page 29 .
10.6 Resetting the Home Connect™ settings
If your appliance experiences connection problems with
the WLAN home network (Wi-Fi) or your appliance wants
to log into a different WLAN home network (Wi-Fi), you
can reset the Home Connect™ settings.
Press .
1.
lights up and the submenu display shows
a
Press / (Submenu) repeatedly until the submenu
2.
display shows and the submenu setting display
shows .
Press (Submenu setting).
3.
a The submenu setting display shows an animation for
approximately 15 seconds.
a The submenu setting display then shows
a The Home Connect™ settings have been reset.
Press .
4.
10.7 Remote diagnostics
The Customer Service can access your appliance via Re-
mote Diagnostics if you ask them to do so, if your appli-
ance is connected to the Home Connect™ server and if
Remote Diagnostics is available in the country where you
are using the appliance.
Tip: Further information and details about the availability
of Remote Diagnostics in your country can be found in the
Service/Support section of your local website: www.home-
connect.com
Home Connect™ en-us
⁠ .
, the appliance
⁠ .
.
17