To Turn Off; Time Programming Function; Switching A Hotplate Off Automatically; Automatic Timer - Siemens EH6 TA1 Série Notice D'utilisation

Then press the + symbol.
3.
The symbol lights up in the display. The powerboost
›
function has been activated.
Note: If any hotplate is switched on when the Powerboost
function is working, and
›
the power level will then be set. The Powerboost function will
Š
be deactivated.

Time programming function

This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■

Switching a hotplate off automatically

Enter the cooking time for the desired hotplate. The hotplate will
switch off automatically once this time has elapsed.
How to program
Select the cooking power required.
1.
Press the 0 symbol. The
2.
selected hotplate. In the time program function display
appears. To select another hotplate, press the
several times, until the
x
lights up.
Press the + or - symbol on the time program function. The
3.
basic setting appears:
+ symbol: 30 minutes.
- symbol: 10 minutes.

Press the + or - symbol until the required cooking time
4.
appears.
After a few seconds, the cooking time will start to count down.
Once the time has elapsed
The hotplate switches off. The warning signal sounds, and the
in the time program function visual display
seconds. The indicator lights up on the hotplate display.
x
Pressing the 0 symbol turns off the indicators and stops the
beep.
Changing or cancelling the time
Press the 0 symbol several times until the required
indicator lights up. Change the cooking time using the + or -
symbols, or set to .
‹‹
26
will flash on the hotplate display;
Š
x indicator lights up on the
symbol
0
indicator of the required hotplate

appears for 10
‹‹

To turn off

Select the hotplate and press the - symbol. The
no longer be displayed and the hotplate will return to the power
level Š . The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Notes
If a cooking time has been programmed in several zones, it
■
can be set to display all time values. To do this, press the
symbol several times until the
hotplate lights up.
Cooking times of up to 99 minutes can be programmed.
■

Automatic timer

With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
‹‹
entitled "Basic settings".
Note: The cooking time of a zone may be cancelled or
changed:
Press the 0
indicator lights up. Change the cooking time using the + or -
symbols, or set to

The timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
Press the
1.
up. appears in the time program function display.
‹‹
Press the + or - symbol on the time program function. The
2.
basic setting will appear.
+ symbol: 10 minutes.
- symbol: 05 minutes.
Set the time required using the + or - symbols.
3.
After a few seconds, the timer will start to count down.
Once the time has elapsed
A warning beep sounds. In the time program function display
is shown, and the
‹‹
the indicators turn off.
Pressing the
beep.
Changing or cancelling the time
Press the
0
x
up. Change the cooking time or set to
-,
indicator for the required
x
symbol several times until the required
‹‹ .
symbol several times until the
0
indicator comes on. After 10 seconds
W
symbol turns off the indicators and stops the
0
symbol several times until the
indicator will
›
0
x
indicator lights
W
indicator lights
W
with the symbols + or
‹‹