Automatic Time Limitation; Basic Settings; Accessing The Basic Settings - Siemens EH6 TA1 Série Notice D'utilisation

Automatic time limitation

If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
flash alternately.

Basic settings

The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator Function
Childproof lock
™‚
Off.*
‹
On.
‚
™ƒ Audible signals
)Confirmation signal and error signal switched off.
‹
Only error signal switched on.
‚
Confirmation signal and error signal switched on.*
ƒ
Automatic time limitation.
™†
‹ Switched off.*
- 99 Automatic shut-off time.
‚
Duration of the time program function warning signal
™‡
10 seconds.*
‚
ƒ 30 seconds.
1 minute.
„
Power-Management function
™ˆ
= Deactivated.*
‹
‚ = 1,000 W. minimum power.
= 1,500 W.
‚
ƒ = 2,000 W.
etc.
or . = maximum power of hob.**
Š Š
Return to basic settings
™‹
Personal settings.*
‹
Return to factory settings.
‚
*Factory settings
**The hob's maximum power depends on the configuration of the installation's connection intensity. To not exceed this maximum
value, the hob includes a series of components that automatically control the power, distributing it between the hotplates in use
as required.

Accessing the basic settings

The hotplate must be off.
Switch on the hob.
1.
In the following 10 seconds, press the
2.
for 4 seconds.
" and ‰
symbol and hold it
@
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
appears on the left side of the screen, and
™‚
on the right.
‹
27