Residual Heat Indicator; Programming The Hob; Switching The Hob On And Off; Set The Hotplate - Siemens EH6 TA1 Série Notice D'utilisation

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.

Programming the hob

This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.

Switching the hob on and off

The hob is turned on and off with the main switch.
To switch on: press the #
main switch lights up. The hob is ready for use.
To switch off: press the
#
main switch disappears. All hotplates are off. The residual heat
indicator stays on until the hotplates have cooled down
completely.
Note: The hob switches off automatically when all the hotplates
are switched off for more than 20 seconds.

Set the hotplate

Select the required power level with the + and - symbols.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
Selecting the power level:
The hob must be switched on.
Press the + or - symbol of the desired hotplate. The
1.
lights up on the display.
Melt
Chocolate, chocolate coating, butter, honey
Gelatine
Heating and warming
Stew (e.g., lentils)
Milk**
Sausages heated in water**
Defrosting and heating
Frozen spinach
Frozen goulash
Slow cooking, simmering
Potato dumplings
Fish
White sauces (e.g., bechamel)
Whipped sauces (e.g., Bearnaise, Hollandaise)
* Uncovered cooking
** Uncovered
24
symbol. The indicator above the
symbol until the indicator above the
Even when switched off, the
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
indicators and the selected power level will appear alternately.
Press the + or - symbol within the following 10 seconds. The
2.
basic setting will appear.
The + symbol = power level 9.
The - symbol = power level 4.

Changing the power level: Press the + or - symbol until the
3.
desired power level appears.
Turning off the hotplate
Press the + or - symbol until
and the residual heat indicator appears.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.

Cooking guidelines table

symbol
‹
The table below contains some examples.
œ / • light will remain on as long as

appears. The hotplate turns off
‹
Power level
1-1.
1-1.
1-2
1.-2.
3-4
2.-3.
2.-3.
4.-5.*
4-5*
1-2
3-4
/
œ •