Gas Burners; Switching On Manually; Switching On Automatically; Safety System - Siemens EC875QB21E Notice D'utilisation

Gas burners

There are indications to show which burner each control knob
operates.
It is essential to ensure that all the burner parts and pan
supports are correctly installed for the appliance to work
correctly. Do not swap the burner caps around.

Switching on manually

Press the chosen burner control knob and turn it
1.
anticlockwise to the required setting.
2. Use any type of lighter or flame (cigarette lighter, matches,
etc.) and bring it close to the burner.

Switching on automatically

If your hob can be switched on automatically (ignition sparkers):
1. Press the chosen burner control knob and turn it
anticlockwise to the maximum power setting.
While the control knob is still pressed down, sparks are
produced on all burners. The flame ignites.
Simmer Plate
This accessory has been
designed to reduce the level
of heat at the lowest power
setting.
Place the accessory directly
on the pan support with the
cones facing upwards, never
directly over the burner. Cen-
tre the pan over the acces-
sory.
Simmer Cap
Lid specially designed to
cook at minimum power. For
its use, the Simmer Cap
needs to be placed on the
auxiliary burner cap.
--------
Code
HZ298107 Additional wok pan support: cast iron
HZ298110 Additional wok pan support: steel enamel
HZ298114 Additional coffee maker support
HZ298105 Simmer Plate
HZ298128 Simmer Cap
HZ298103 Wok pan
The manufacturer accepts no liability if these accessories are
not used or are used incorrectly.
2. Release the control knob.
Turn the control knob to the required setting.
3.
If it does not come on, turn the control knob to the off setting
and repeat the steps above. This time, press and hold the
control knob for longer (up to 10 seconds).
:
Risk of deflagration!
If after 15 seconds the flame does not ignite, switch off the
burner and open a nearby window or door. Wait at least one
minute before trying to switch the burner back on.

Safety system

Depending on the model, your hob may have a safety system
(thermocouple) that prevents the flow of gas if the burners
accidentally switch off.
WKHUPRFRXSOH LJQLWLRQ VSDUNHU
To ensure that this device is active:
Switch on the burner as usual.
1.
2. Without releasing the control knob, press and hold it down
firmly for 4 seconds after lighting the flame.

Switching off a burner

Turn the corresponding control knob clockwise to the 0 setting.
Wok pan
The wok pan diffuses intense
heat uniformly, so that the
food is cooked in less time
and using less oil.
Always follow the manufac-
turer's instructions when
cooking with a wok pan.
11