Publicité
Les langues disponibles
Les langues disponibles
Selecting the AV source
Channel/source information
7.3 AV source
Press the AV button to open the AV sources selection window to select a device
>
connected to the HDMI inputs (HDMI 1/2), component input (YPbPr), Scart socket
(EuroAV), VGA port (VGA), video port (Video) or S-Video port (S-Video).
Select the source you want using the up/down arrow keys and confirm by
>
pressing the OK button to switch over to the selected input.
To do this also note points 7.2.1 and 7.2.3 in the quick start manual.
7.4 Channel/source information
7.4.1 Infobox
An Infobox appears on the screen for the set period every time you change channels.
The channel slot and name as well as the source of the channel selected, the channel list in
which the channel is located and the title of the current programme with the start/end time
and the progress bar, as well as further channel information (e.g.
transmissions,
for subtitles,
are shown in this Info box.
The progress bars are coloured yellow according to the amount of transmission time
already expired for the current programme. If the beginning of the progress bar is
coloured red the transmission started too early and if the end of the progress bar is
coloured red the current programme has overrun.
The current time is shown in the upper right-hand corner of the screen.
7.4.2 Displaying the clock and channel information
This function allows you to see channel information about the channel being watched.
Pressing the Info button allows the information mentioned in point 7.4.1 of the
>
quick start manual to be displayed again for the set period.
for encrypted channels or
26
for teletext,
for Dolby Digital broadcasts)
for 16:9
Publicité
