TechniSat TechniVision 22 HD Manuel De Demarrage Rapide page 18

Initial installation
Display mode
Use the up/down arrow keys to select your preferred display mode and confirm by
>
pressing the OK button.
The values preset by the selected displayed mode can be adjusted as you want after
AutoInstall, in the main menu under Settings > Picture settings.
When selecting the intensive display mode, note the message(s) that appear and
confirm by pressing the OK button.
Selecting reception signals
Use the up/down arrow keys to select the available reception signals.
>
DVB-S
DVB-C
DVB-T
Analogue CT for analogue terrestrial and cable channels.
Use the right/left arrow keys to indicate whether you wish to use the highlighted
>
reception signal (On) or not (Off).
Confirm by pressing the OK button.
>
for digital satellite channels
for digital cable channels
for digital terrestrial channels;
18