TechniSat TechniVision 22 HD Manuel De Demarrage Rapide page 20

Initial installation
Channel search / ISIPRO - DVB-S only
You have various options for searching for new channels or updating the channel list. You
can use the ISIPRO service list function to download a new satellite channel list for your TV
from the satellite or run a channel search.
To download the available current channel list, use the up/down arrow keys to
>
highlight the ISIPRO - service list update line and start the process by pressing
the OK button.
> If instead of updating the channel list you want to run a channel search via satellite, or
the DVB-S reception signal has not been configured, use the up/down arrow keys
to highlight the All channels or All unencrypted channels field, then start the
channel search process by pressing the OK button.
> If you do not want to start either the service list update or a channel search, you can
skip this step by pressing the Info button.
The ISIPRO - service list update item can only be selected if you have activated
the DVB-S source in "Selecting the reception signals". After the service list
update, an automatic channel search on all other configured reception sources is then
carried out via "All Channels".
When using All channels, free-to-receive and encrypted channels are searched for;
when using All unencrypted channels only free-to-receive channels are
searched for.
During the channel search the reception areas you have selected area automatically
scanned for channels. This procedure may take several minutes. Please note all
messages displayed on screen.
If you skip the channel search/service list update, the factory channel list is loaded, as
long as DVB-S has been configured in "Selecting the reception signals". In this
event no channels for other sources are available. However, you can run a channel
search at any time in the main menu under Channel search.
20