TechniSat TechniVision 22 HD Manuel De Demarrage Rapide page 19

Antenna configuration (DVB-S)
In this step of the installation you can adjust your TV setup to the configuration of your
satellite antenna.
If the DVB-S source has been deactivated, this page of the installation wizard does not
appear; you are taken directly to the "Antenna configuration (DVB-T)" page
instead.
Press the OK button to accept the default antenna setting and continue with the
>
"Antenna settings (DVB-T)" section.
> If the configuration of your reception equipment does not match the default setting,
you can open the antenna configuration by pressing the Option button and adjust the
setting on your reception equipment.
Antenna configuration (DVB-T)
A channel spectrum with the signal levels of the various channels is displayed in this step, in
order to align the DVB-T antenna for the best reception.
The "channel search / ISIPRO" appears immediately if DVB-T has been deactivated.
Use the right/left arrow keys to switch the voltage supply on or off.
>
Press the OK button to accept the setting and access the next stage of the
>
installation wizard.
19
Initial installation