Publicité
Les langues disponibles
Les langues disponibles
WARNING: This appliance contains harmful dust. The emptying
and maintenance, including the removal of the dust bag, may
only be executed by trained personnel wearing suitable protection
equipment. Do not switch on until the complete filter system has
been installed.
Class L dust extractors are suitable to extract dry, non-combustible dusts
with workpace limit values of > 1 mg/m3.
Batteries may be used with the vacuum cleaner, see section
"Battery Type
Date Code Position (Fig. A)
The date code
, which also includes the year of manufacture,
17
is printed into the housing.
Example:
2021 XX XX
Year and Week of Manufacture
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
On/off switch
1
Dust bowl
2
Dust bowl release button
3
Filter assembly
4
Battery pack
5
Battery release button
6
Main handle
7
Belt hook
8
Belt hook screw
9
Nozzle
10
Extension
11
Flexible hose
12
Crevice nozzle
13
Round brush
14
Gulper brush
15
Floor nozzle
16
Date code
17
Intended Use
Your DCV501L cordless vacuum cleaner has been designed to
vacuum dry, non-combustable dusts up to dust Class L with
limit values for occupational exposure greater than 1 mg/m³.
This vacuum cleaner is a professional power tools.
DO nOT use to vacuum liquids.
DO nOT use the vacuum cleaner for combustible dust.
DO nOT use the vacuum cleaner in explosive atmospheres.
nOTE: This appliance is suited for the commercial use, e.g.
in hotels, schools, hospitals, factories, shops, offices, rental
companies, and on construction sites.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This machine is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge. Children should never be
left alone with this product.
• Children should be supervised to
ensure that they do not play with the
appliance.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
WARNING: Use only D
Inserting and Removing the Battery Pack
from the Tool (Fig. C)
nOTE: Make sure your battery pack
To Install the Battery Pack into the Tool Handle
1. Align the battery pack with the rails inside the tool's
handle (Fig. C).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the battery release button
battery pack out of the tool handle.
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. B)
Some D
WALT battery packs include a fuel gauge which consists
e
of three green LED lights that indicate the level of charge
remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge
button
18
. A combination of the three green LED lights will
EnGLIsh
WALT battery packs and chargers.
E
is fully charged.
10
6
and firmly pull the
33
Publicité
