Canton Digital Movie Notice D'utilisation page 42

Deleting source devices
In order to totally delete a programmed device use the "Clear" func-
tion. After pressing this function you will be asked if you really want
to delete the device. Confirm this by pressing the "yes" function key.
To abort the process press "no". The remote control will then return to
the Device Selection Menu. Use
leave programming mode press
Renaming the source devices
If you want to rename a source device you can select a description
from a comprehensive list of pre-programmed device names. Follow
the steps described above.
Programming the main keys
The DM System has 5 main keys (Programme +/-, Volume +/- and Mute), which can be allocated to the IR codes of other infrared-controlled
devices. Follow the steps shown above.
Warning: The Volume +/- and Mute keys can only be used for infrared-controlled devices if no DM System has been registered. The volume control
of the DM System will take priority over all other IR devices.
to enter the "Learn Menu". To
again.
42