Canton Digital Movie Notice D'utilisation page 38

Tuner
The Canton DM 90.2 has an integrated FM Tuner (VHF) with RDS function. This can be selected using the function keys (radio) in the main menu
of the remote control. There you can make the following adjustments:
The automatic search is activated by pressing and holding (>2 sec.) the "<" or ">" arrow keys (to search backwards or forwards). During the search
process the word "Seek" will appear in the display. The DM System stops automatically at every station with a sufficiently strong signal.
The manual search is controlled by pressing on the "<" or ">" keys. This function can be used to fine-tune a radio station or to search manually for
stations with a weaker signal.
Reduction of hissing in stereo reproduction
The DM System automatically uses stereo or mono reproduction depending on the strength of the signal. If you find a stereo reproduction has too
much hissing you can use the function key to change it to mono reproduction and reduce the hissing.
Stereo Mono
Saving a radio station
To save a radio station in a programme slot press and the programme slot number will start to flash. Use arrow keys and to select
from among 50 programme slots. Alternatively you can use the number keys to enter the programme slot number directly. After 5 seconds with no
keys pressed the radio station will be saved in the programme slot shown on the display and the programme slot number will stop flashing.
Note: The station name, transmitted via RDS, (e.g. HR 1, BR 2, SWR 3, ...) will only appear upon selecting a saved radio station if the name
appeared on the display at the point of pressing the OK key (the starting point of the saving process).
Selecting a saved radio station
Use the arrow keys and to select a programme slot. Alternatively you can use the number keys to enter the programme slot number
directly.
38