Canton Digital Movie Notice D'utilisation page 32

Connecting the DM 90.2
There is no need to connect up the individual "loudspeakers"
with the DM 90.2 as all the wiring is internal.
Connecting the source devices
The Canton DM System offer a wide range of connection
options for almost all popular source devices, such as DVD
players, video recorders, satellite receivers, multi-media con-
soles (Playstation®, X-Box®, ...) etc. The audio connections
for your source devices need to be connected to the corre-
sponding ports on the back of the DM 90.2. Source devices
that have a digital output for Dolby Digital and DTS Bitstream
should be connected digitally to the DM System. This ensures
full Dolby Digital and DTS sound quality.
The video signal connections are made directly between
the source devices and the image display device. The image
source to be used is selected directly from the menu of the
image display device.
In order to use the integrated FM Tuner of the DM System
you need to connect the aerial supplied to the appropriate
socket on the DM 90.2. Better reception will be achieved if
the aerial is extended. For optimal reception we recommend
connection to a broadband cable network or a roof-mounted
aerial using the coaxial cable supplied.
Before you can start using the DM 90.2 for sound reproduc-
tion you need to go through the initial installation process
and assign the inputs to the source devices. You will be asked
to do this automatically when you first switch on the device
(see page 12).
The Line 2 / Phono input allows you to connect either a line-level au-
dio source (up to 2V) or a record player (up to 5mV). This can be done
by selecting the relevant set up in the system menu.
The Pre (2.1/5.1 Mode) output allows you to connect, for example,
active wireless loudspeakers. According to the set up selected in the
System Menu (Factory Set / Gerätenamen) the output will be through
the front channels in 2.1 Mode or the surround loudspeakers in 4.1
Mode.
The Zone 2 /Line output has a number of output options, which can
be selected in the System Menu of the remote control:
- Zone 2 with individually adjustable volume for connection to an
active Multiroom or wireless loudspeaker system.
- Line with fixed volume for connection to a recording device, etc ...
Warning: In order to play 5.1 multi-channel recordings (Dolby Digital
or DTS) via the ZONE 2/LINE OUT the "dynamic" setting in the
System Menu should be set to "comp". For normal playback we
recommend that you use the "full" setting (see page 40).
In order to use Dolby Digital/DTS signals (Bitstream) via Zone 2 you
need to select Zone 1 (Main listening zone) as the input.
The Sub output allows an active subwoofer to be connected. This
needs to be activated in the System Menu (see page 17). If the Sub
output is activated the internal subwoofer of the DM System goes
through the high pass filter while the external subwoofer goes through
the low pass filter at 80Hz.
32