Canton Digital Movie Notice D'utilisation page 41

Learn Menu
Pressing and at the same time brings you to the "Learn Menu", where you can lern infrared-controlled devices and register other DM
Systems.
Once you have selected the source with the function to be programmed and confirmed your selection using you will see the message
"press remote button". Position the original remote control (e.g. from your DVD player) opposite the one from your DM System (approx. 5 cm
distance). On the original remote control briefly press the key with the function to be programmed and wait until the process has been confirmed
on the display.
If the programming has been successful you will see the message "Programming successful".
Repeat the process until all desired functions have been transferred. Press to return to the
previous menu.
If the transfer of the remote control data is unsuccessful the message "Programming failed" will
appear for approx. 5 seconds. After that the previous menu will be displayed and you can either repeat
the programming or abort the process.
41