Nilfisk SPINTEC 443 Mode D'emploi page 81

TROUBLESHOOTING
SWIRLS ON THE FLOOR AFTER SCRUBBING
• Floor not clean.
• Incorrect solution.
• Area not properly swept - debris in pad or brush.
• Improper pad or brush for the job.
• Moving the machine too fast.
SWIRLS ON THE FLOOR AFTER DRY BUFFING
• Moving the machine too fast.
• Floor fi nish too soft.
• Area not properly swept - debris in pad or brush.
• Improper pad or brush for the job.
CIRCLES ON THE FLOOR
• Machine standing still while the brush or pad is running.
FLOOR FINISH REMOVED
• Improper pad... too aggressive.
• Solution too strong.
MACHINE WOBBLES DURING OPERATION
• Defective pad... one side is more dense than the other.
• Machine left sitting on brush or pad for extended period of time causing bristles or pad to "take a set".
• Pad not "seated" properly into pad holder bristles.
• Warped block on brush or pad holder - replace.
• Wrong pad holder for application
MACHINE DOES NOT RUN
• Check circuit breaker (13) on models 443H & D (only on models after serial number break)
• Check plug for proper connection - on machine and at wall outlet.
• Check building circuit breaker.
• Call for service.
TECHNICAL SPECIFICATIONS (as installed and tested on the unit)
Model
Model Number
Electrical
Pad/Brush Speed
Pad/Brush Size
Total Weight (w/cord)
-Machines built after Serial Number Break
Sound Pressure Level (ISO 11201)
Vibrations at the Hand Controls (ISO 5349-1)
-Machines built before Serial Number Break
Sound Pressure Level (ISO 11201)
Vibrations at the Hand Controls (ISO 5349-1)
Protection Grade
Protection Class
Type
Aluminum
Electrical / motors / engines - misc
Ferrous metals
Harnesses / cables
Liquids
Plastic - non-recyclable
Plastic - recyclable
Polyethylene
Rubber
revised 8/2015
Spintec 443
56380065, 56380066, 56380073
1.1kW - 230V / 50/60Hz
167 rpm
17" (43 cm)
82 lbs (37.3 kg)
59dB LpA, 3KpA
0.42 m/s
59dB LpA, 3KpA
0.42 m/s
IPX4
Material Composition and Recyclability
% of machine weight
19%
55%
FORM NO. 56041822 - Spintec 443 / Spintec 443 H / Spintec 443 DS - 81
Spintec 443 H
56380068, 56380069, 56380074
1.5kW - 230V/50Hz
400 rpm
17" (43 cm)
87 lbs (39,5 kg)
69dB LpA, 3KpA
2 2.49 m/s
62dB LpA, 3KpA
0.65 m/s
2
IPX4
% recyclable
100%
86%
9% 100%
9% 43%
0% 0%
5% 0%
0% 0%
0% 0%
4% 0%
Spintec 443 DS
56380070, 56380071, 56380075
1.1kW / 1.5kW - 230V/50Hz
180 / 360 rpm
17" (43 cm)
88 lbs (40 kg)
70.1dB LpA, 3KpA / 70.8dB
LpA, 3KpA
2 2.5 m/s 2 / 2.5 m/s
61dB LpA, 3KpA
0.29 m/s / 0.48 m/s
2 2
IPX4
2
2