Makita GA042G Manuel D'instruction page 2

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Applicable grinding wheel
Applicable cut-off wheel
Applicable wire wheel brush
No load speed (n ) / Rated speed (n)
0
Overall length (with BL4040)
Net weight
Rated voltage
Speed adjusting dial
Wireless activation function
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Max. wheel diameter
Max. wheel thickness
Max. wheel diameter
Max. wheel thickness
Max. wheel diameter
Max. wheel thickness
GA042G GA043G GA044G
100 mm 115 mm 125 mm
(4") (4-1/2")
100 mm 115 mm 125 mm
(4") (4-1/2")
- 115 mm (4-1/2")
- 16 mm (5/8")
433 mm (17")
3.0 - 5.4 kg (6.6 - 11.9 lbs)
D.C. 36 V - 40 V max
BL4020 / BL4025* / BL4040* / BL4050F* / BL4080F
* : Recommended battery
DC40RA / DC40RB / DC40RC
2 ENGLISH
GA045G GA046G
100 mm 115 mm
(5") (4") (4-1/2")
6 mm (1/4")
100 mm 115 mm
(5") (4") (4-1/2")
1.6 mm (1/16")
- 115 mm (4-1/2")
- 16 mm (5/8")
8,500 /min
418 mm (16-1/2")
2.9 - 5.3 kg 3.0 - 5.3 kg
(6.4 - (6.6 - 11.7 lbs)
11.7 lbs)
-
-
PDC01 / PDC1200
GA047G
125 mm
(5")
125 mm
(5")