Hach NT3100sc Manuel D'utilisation page 23

Message
Shaft seals
Seals
Service
Calibration NO3/NO3N
Calibration NO2/NO2N
Matrix calibration
Section 8 Replacement parts and accessories
Personal injury hazard. Use of non-approved parts may cause personal injury, damage to the
instrument or equipment malfunction. The replacement parts in this section are approved by the
manufacturer.
Note: Product and Article numbers may vary for some selling regions. Contact the appropriate distributor or refer to
the company website for contact information.
Replacement parts
Description
Wiper set, 1 mm (0.04 inch), NT3100sc / NT3200sc
Wiper set. 2 mm (0.08 inch), NT3100sc / NT3200sc
Wiper set. 5 mm (0.20 inch), NT3100sc / NT3200sc
Accessories
Description
Cable extension set, 5 m (16.4 ft)
Cable extension set, 10 m (32.81 ft)
Cable extension set, 15 m (49.21 ft)
Cable extension set, 20 m (65.62 ft)
Cable extension set, 30 m (98.43 ft)
Cable extension set, 50 m (164.04 ft)
Mounting hardware system with brackets, 90° adapter, stainless steel
Includes:
Base
Fastening lug
Retaining clamp (2x)
Mounting pipe 2 m
Hardware HS
Table 6 Warning and reminders (continued)
Possible cause
The time interval for servicing the shaft
seals has expired.
The time interval for servicing the seals
has expired.
The time interval for factory service has
expired.
The set calibration interval has expired.
The set calibration interval has expired.
The set calibration interval has expired.
W A R N I N G
Solution
Contact technical support.
Contact technical support.
Contact technical support.
Complete a standard calibration.
Complete a standard calibration.
Complete a matrix calibration.
Quantity
5 LXZ448.99.00002
5 LXZ448.99.00003
5 LXZ448.99.00033
Quantity
each
each
each
each
each
each
each LZY714.99.53220
each
each
2
each LZY714.99.00020
each
Item no.
Item no.
LZX848
LZX849
LZX850
LZX851
LZX852
LZX853
LZY827
LZY804
LZX200
LZY823
English 23