Overview Of Accessories; Power Supply - ASTROS InductWarm 140 Instructions Originales

Overview of accessories

Use only original accessories from Gastros Switzerland!
CAUTION – Risk of fire and electric shock. Only replace power cord (No. 3) with original cable
by the manufacturer: Article No.: 6 01 10x xx
Cabling (example)
The power supply (POWER side) is independent of the BUS coupling (BUS side). Each unit must be connected to
electrical power, either directly via a power cord (3) as seen with devices A and D or indirectly via a power chain
cable (8) as seen with devices B and C.
In the example above, induction units A and B are connected with the BUS cable (7) and are controlled by one
control unit (4). These two elements have the same power level. Devices C and D are controlled individually by
own external control device. The infrared remote control (5) can be used to control all individual elements.

Power supply

23