CAME BXV04AGS Instructions De Montage page 78

Radio decoding
Choose the type of radio coding for the transmitters enabled to control the operator.
If you choose the type of radio coding for the transmitters [Rolling code] or [TW key block], any transmitters saved previously will be deleted.
Manage users
Rolling self-learning
Save a new rolling code transmitter by activating acquisition from a rolling code transmitter that has already been saved. The saving and acquisition procedures are
explained in the transmitter manual.
Manage users
Change mode
Change the function assigned to a specific user.
Manage users
FW version
Display the firmware version and the GUI installed.
Information
Radio decoding
Rolling self-learning
Change mode
FW version
All decodings
Rolling code
TW key block
Confirm? NO
Confirm? YES
Deactivated (Default)
On
Use the arrows to choose the number associated with the user to be changed.
Alternatively, you can select a user by sending a command from the associated
device.
Press ENTER to confirm.
Choose the command to associate with the user.
Step-by-step
Sequential
Open
Partial opening
B1-B2 output
Press ENTER to confirm.
Confirm? NO
Confirm? YES
FW x.x.xx (firmware)
GUI x.x (graphics)