Additional Light; Passage-Open Warning Light; Safety Devices - CAME BXV04AGS Instructions De Montage

Signalling devices
1

Additional light

It increases the light in the manoeuvring area.
2 Flashing beacon
It flashes when the operator opens and closes.
3

Passage-open warning light

It notifies the user of the operator status.

Safety devices

During programming, configure the type of action that must be performed by the device connected to the input.
Connect the safety devices to the CX and/or CY and/or CZ and/or CK inputs.
If used, the contacts CX CY CZ CK must be configured during programming.
For systems with multiple pairs of photocells, please see the manual for the relevant accessory.
DELTA photocells
Standard connection
3P 4 7 3P 4 7 10 TS 2 CX CY CZ CK
+ -
10 11 NO C NC
RX
10 11 E1 5
2
1
+ -
10 11
TX
3
DELTA photocells
Connection with safety test
See [Safety devices test] function.
3P 4 7 3P 4 7 10 TS 2 CX CY CZ CK
+ -
10 11 NO C NC
RX
+ -
10 11
TX