CAME BXV04AGS Instructions De Montage page 75

<Opening colour> BUS flashing beacon
Set the BUS flashing beacon colour during operator opening.
The function only appears if there is a BUS flashing beacon connected.
During the count preceding automatic closure, the colour of the flashing beacon is the same as during opening.
Configuration >
Manage lights >
BUS flashing beacon
<Closing colour> BUS flashing beacon
Set the BUS flashing beacon colour during operator closing.
The function only appears if there is a BUS flashing beacon connected.
Configuration >
Manage lights >
BUS flashing beacon
<Pre-flashing colour> BUS flashing beacon
On the BUS flashing beacon, set the flash colour for before opening and closing manoeuvres (pre-flash).
The function only appears if there is a BUS flashing beacon connected.
Configuration >
Manage lights >
BUS flashing beacon
<Signal error> BUS flashing beacon
Set the colour of the BUS flashing beacon in the event of an error signal.
The warning light is activated after sending a command for movement.
The function only appears if there is a BUS flashing beacon connected.
Configuration >
Manage lights >
BUS flashing beacon
Opening colour
Closing colour
Pre-flashing colour
Signal error
White (Default)
Yellow
Orange
Red
Purple
Blue
Light blue
Green
White (Default)
Yellow
Orange
Red
Purple
Blue
Light blue
Green
White (Default)
Yellow
Orange
Red
Purple
Blue
Light blue
Green
Deactivated (Default)
White
Yellow
Orange
Red
Purple
Blue
Light blue
Green