Battery Tool Use And Care; Service; Safety Instructions For Drills - Parkside PABS 20-Li D5 Traduction Des Instructions D'origine

5 . Battery tool use and care

a) Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of
fire when used with another battery pack .
b) Use power tools only with specifically desig­
nated battery packs. Use of any other battery
packs may create a risk of injury and fire .
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from
one terminal to another. Shorting the battery
terminals together may cause burns or a fire .
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek medi­
cal help. Liquid ejected from the battery may
cause irritation or burns .
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury .
f) Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire
or temperature above 130 °C (265°F) may
cause explosion .
g) Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc­
tions. Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire .
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries!
Protect the rechargeable battery
from heat, for example from
continuous exposure to sunlight, fire,
water and moisture. There is a risk of
explosion .
PABS 20-Li D5

6 . Service

a) Have your power tool serviced by a qualified
repair person using only identical replace­
ment parts. This will ensure that the safety of
the power tool is maintained .
b) Never service damaged battery packs. Service
of battery packs should only be performed by
the manufacturer or authorized service providers .

Safety instructions for drills

Safety instructions for all work
■ Hold the power tool only by the insulated
handles when you are carrying out work in
which the accessory tool may come into
contact with concealed power cables or the
tool's own power cord. Contact with a live
wire may electrify exposed metal parts of the
tool and could give the operator an electric
shock .
■ You can collect any dust produced using a
vacuum cleaner, for example .
Safety information for using long drill bits
■
Do not use a higher rotational speed than the
maximum permissible speed. At higher
speeds, the drill bit can bend slightly if allowed
to turn freely without being in contact with the
workpiece and this can lead to injuries .
■ Always start drilling at a low speed and with
the drill bit in contact with the workpiece. At
higher speeds, the drill bit can bend slightly if
allowed to turn freely without being in contact
with the workpiece and this can lead to injuries .
■ Do not exert excessive pressure and only
along the length of the drill bit (no lateral
pressure). Drill bits can bend and break, which
can lead to a loss of control and injuries .
GB │ IE │ 19 ■