Enabling The Secure Link Function - Sony HT-ST5 Mode D'emploi

Enabling the Secure Link function

You can specify the wireless connection to be used to link the Bar
Speaker to the subwoofer using the Secure Link function. This
function is useful when you use multiple wireless products.
On/standby lamp
1
Press the MENU button on the remote control.
2
Select "WS" with the   (select) buttons then press the
ENTER button.
3
Select "SEC. ON" with the   (select) buttons then press the
ENTER button.
4
When "START" appears, press the ENTER button.
"SEARCH" appears, and the system seeks equipment usable with
Secure Link.
Proceed to the next step within 2 minutes.
To quit the Secure Link function during the search for
equipment, press the RETURN button.
5
Press the SECURE LINK button on the subwoofer with the
point of a pen, etc.
The on/standby lamp on the subwoofer lights in yellow, and
"OK" appears on the front panel display of the Bar Speaker.
If "FAILED" appears, make sure that the subwoofer is turned on,
and perform the process again from step 1.
6
Press the MENU button.
The menu goes off.
SECURE LINK
continued
9
US