Sony HT-ST5 Mode D'emploi page 17

Menu
SYSTEM A. STBY
(Auto standby)
IR REP.
(IR repeater)
VER
(Version)
SYS.RST
(System cold reset)
WS SEC. ON/SEC.OFF
(Secure link on/
Secure link off)
BAND
(Band mode select)
LNK.CHK
(Link check)
Function
To switch the AUTO POWER OFF function on or off. (ON/OFF) The
system turns off automatically when no operation has been made
within a certain period (about 20 minutes) and the system is not
receiving an input signal.
Enables the system to relay the signal from a remote control to the
TV. (ON/OFF)
Refer to "Enabling the IR repeater function" (page 8) for details.
To display the current firmware version.
To reset menus and settings (sound fields, etc.) of the system to
the initial status when it does not work properly.
Refer to "Troubleshooting" (page 23) for details.
When the Secure Link connection is not established, "SEC. ON"
appears.
SEC. ON: Allows you to link the specified Bar Speaker and
subwoofer when there are several wireless sound devices
within range.
When the Secure Link connection is established, "SEC.OFF"
appears.
SEC.OFF: Releases the Secure Link setting.
Refer to "Enabling the Secure Link function" (page 9) for details.
To switch the system frequency band mode between 5.2 and
5.8 GHz bands.
(AUTO/5.2GHz/5.8GHz)
Note: This item only appears when regions correspond to both 5.2
and 5.8 GHz frequency bands.
To check whether the wireless sound system of the system can
connect or not. (OK/NG)
Default
ON
OFF
–
–
–
AUTO
–
17
US