Installation Of The Water System; Drainage; Electrical Connections - La San Marco 85 Manuel D'utilisation Et D'entretien

5.4 Installation of the water system

INTERNAL PUMP
1) Use the braided 900 mm stainless-steel tube 32 to connect the on-off valve of the water supply to the
water softener inflow valve (figure 1).
2) Using the rubber-braided 35 stainless-steel tube (2500 mm long), connect the internal pump intake with
the water softener valve (figure 2).
32
Figure 1
EXTERNAL PUMP
1) Use the braided 900 mm stainless-steel tube 32 to connect the water supply on-off valve to the water
softener inflow valve 1 (figure 3).
2) Using the rubber-braided stainless-steel tube 35 (600 mm long), connect the pump intake with the water
softener valve (figures 3-4).
3) Using the rubber-braided stainless-steel tube 36 (1600 mm long), connect the pump outflow with the
nipple 5 of the water system on the machine (figures 4-5).
Figure 3
35

5.5 Drainage

Connect the drainage tube to the grounds collecting tray and to the water drainage system.

5.6 Electrical connections

manufacturer cannot be held liable.
26
35
Figure 2
36
Figure 4
35
36
Figure 5
-
-