Connection Restrictions - Epson EasyMP EMP-7850 Guide De Mise En Route

Connecting Using Easy Connect Mode

Connection Restrictions

When projecting images from a computer using the Network Screen, the following
requirements must be met. Please ensure that you meet these requirements.
Supported Resolution
Computer screen resolutions that can be projected are shown below. If the
resolution is on this list, the computer images may be directly projected. You cannot
connect to a computer with a resolution higher than UXGA.
• VGA (640×480)
• SVGA (800×600)
• XGA (1024×768)
• SXGA(1280×960)
• SXGA (1280×1024)
• SXGA + (1400×1050)
• UXGA (1600×1200)
If the computer resolution is higher than XGA, the following message is displayed.
Image transfer slows if PC resolution is higher than XGA (1024 ×768 pxl.).
Do you want to continue?
If you click "Yes", the connection is made, but display speed will be slower.
Additionally, if there are EMP-735 projectors connected and you are trying to
connect at a resolution greater than SXGA, you will be unable to connect and the
following message will be displayed.
Some projectors do not support SXGA. Reduce resolution and retry.
Connect after setting the resolution of the computer to SXGA or less.
If a computer with a special screen size is used where the ratio of height - width is
not represented on the previous list, such as 1280 × 600, a screen resolution to
project images that matches the width dimension is selected from the seven choices.
In this case, the empty margins are black.
32