Epson EasyMP EMP-7850 Guide De Mise En Route page 25

Connecting Using Easy Connect Mode
6
Tilt the [
to "Advanced", and press the [Enter] button.
The Easy connect mode advanced settings screen is displayed.
7
Move the cursor to the selected item, and press the [Enter] button to set
that item.
The settings of each of the items is shown below.
Letters or numbers must be input depending on the item. See the "Entering
Letters and Numbers" (
Projector name Enter a name for the projector. This name is used to
Ad hoc mode
settings
ESSID
24
] button on the remote control to the right, to move the cursor
p.26 ) for the letter and number input methods.
identify the projector when connected to the network.
Up to 16 single-byte alphanumeric characters can be
entered.
Select either "ESSID ad hoc" or "Channel ad hoc". Ensure
the same mode is selected on the connected computer.
Enter the ESSID. The initial value is "EPSON."
Up to 16 single-byte alphanumeric characters can be
entered.
Ensure that the same string is entered on the connected
computer.