Epson EasyMP EMP-7850 Guide De Mise En Route page 32

5
A network connection is established between the computer and
projector, and the computer screens are projected by the projector.
The EMP NS Connection toolbar is displayed on the computer screen. Use the
toolbar to operate the projector, change options and settings, and disconnect
from the network.
If the toolbar is in the way during a presentation, you can minimise it. You can
perform projector operations and setup using the remote control.
"Selecting the Projection Quality (Colour Mode Selection)" and "Basic
Operations" in the User's Guide
"Adjusting the Screen Image" and the subsequent material, in the User's
Guide to further adjust the projected images and perform other functions.
Tip :
• When projecting a PowerPoint file, you can skip to the next slide by pressing the [
button or return to the previous slide by pressing the [
• To connect to a different computer when changing presenters, start EMP NS
Connection on the selected computer and connect. The connection with the current
connected computer will be terminated automatically, and the next computer will be
connected.
p.34
Toolbar
] button.
]
31