Mechanical Features - JUMO Wtrans p Notice De Mise En Service

7.5

Mechanical features

Housing material
Case seal material
Pressure sensor material
Process connection material
Cleaning
Installation position
Weight
PA, transparent (UV-resistant)
VMQ
Stainless steel 17-4 PH
at 0 to 160 bar, 0 to 250 bar, 0 to 400 bar, and 0 to 600 bar;
Stainless steel 316 L
at all other pressure ranges
Stainless steel 316Ti;
Stainless steel 316 L with surface roughness Ra < 0.8 µm
for JUMO PEKA hygienic process connection
The device can be cleaned with conventional washing, rinsing, and cleaning
agents.
Any (with due consideration of the application) (can be used inside and outside
of buildings)
Approx. 250 g (with lithium battery and process connection 504: G 1/2 DIN EN
837)
7 Technical data
35