Identifying The Device Version; Nameplate - JUMO Wtrans p Notice De Mise En Service

2

Identifying the device version

2.1

Nameplate

Position
The nameplate is affixed to the pressure transmitter.
(1) Device type
(2) Part no.
(3) Nominal measuring range
(4) Voltage supply (
(5) Fabrication number
(6) Date of manufacture 2030 = 2020/30 (year/calendar week)
(7) Frequency
(8) Transmitter ID
Device type
Compare the specifications on the nameplate with your order documents. The supplied device version
can be identified using the order code in chapter 2.2 "Order details", Page 14.
Part no.
The part no. clearly identifies an article in the catalog. It is important for communication between the cus-
tomer and the sales department.
Fabrication number
Among other things, the date of manufacture (year/calendar week) and the version number of the hard-
ware is specified in the fabrication number.
Date of manufacture
Example: fabrication number = 0012345601020300123
The figures in question are in positions 12, 13, 14, and 15 (from the left).
The device was manufactured in the 30th calendar week of 2020.
Frequency
The frequency identifies the frequency band used by the device for transmission. In the 868 MHz band
(Europe), the transmission is carried out at 868.4 MHz.
Transmitter ID
The transmitter ID is factory set. It must be entered and activated on the receiver to establish communi-
cation between the transmitter and receiver. The transmitter ID can be changed to customer-specific re-
quirements using the setup program. The user must ensure that several transmitters with identical
transmitter IDs are not active.
36039 Fulda, GERMANY
(1)
Typ: 402060/000
(3)
0 ... 250 bar rel.
(5)
F-Nr.: 0012345601020300123
(7) Frequenz: 868.4 MHz
Symbol for direct voltage)
2 Identifying the device version
Sender-ID: 12345
TN: 00123456
3.6 V
(2)
(4)
(6)
(8)
13