Setting The Timer For Energy-Saving Standby Mode - Melitta Caffeo SOLO Guide D'utilisation

•
Press the on/off button
egory.
→
All symbols in the display flash briefly for confirmation. The appliance is
ready for operation, the standby symbol
Note
During the adjusting process, if you do not press a button within 60 sec-
onds the appliance automatically reverts to standby mode.

Setting the timer for energy-saving standby mode

Additional information on energy-saving stand-by mode is provided on page 62. the
timer is factory-set to level 1 (5 minutes).
Prerequisite: The appliance is ready for operation, the standby symbol
is illuminated.
Adjust the timer as follows:
•
simultaneously press the button for coffee dispensing
ton for brewing strength
→
the standby symbol
• Press the button for coffee dispensing
for energy-saving stand-by mode.
→ the symbol for the water reservoir
•
Press the brewing strength button several times
possible times for the timer.
64
to confirm the selected water hardness cat-
is illuminated.
for more than 2 seconds.
is flashing rapidly.
is illuminated.
and the but-
twice to call up the menu
to select from four