Transport And Disposal; Preparation For Transport, Protection Against Freezing And Measures For Longer Periods Of Non-Use - Melitta Caffeo SOLO Guide D'utilisation

13 Transport and Disposal

Preparation for transport, protection against freezing and meas-
ures for longer periods of non-use
Drying out the appliance
We recommend that you dry out the appliance if it will not be used for an extended
period of time. this protects the appliance from frost damage.
Prerequisite: The appliance must be ready for operation.
• take the Melitta
• simultaneously press the button for coffee dispensing
On/Off button
→ the standby symbol
quently, the symbol for the water reservoir
• Flip up the lid of the water reservoir (Fig.
reservoir up and out of the appliance.
→ the symbol for the valve
• Place a vessel under the steam pipe.
•
turn the valve switch clockwise to open the valve.
→
Water will run out of the steam pipe and into the vessel; steam will also es-
cape. the valve symbol
Warning!
Danger of scalding by hot steam
Make sure that you do not burn yourself on the hot steam that escapes
from the steam pipe during the drying process.
•
As soon as no more steam is escaping, turn the valve switch anticlockwise
to close the valve.
→
the appliance has been dried out.
claris water filter out of the water reservoir.
® ®
for longer than 2 seconds.
is illuminated after a brief heat-up phase. subse-
will be illuminated.
will flash.
will be illuminated.
A, no. 7) and pull the water
and the
77