Troubleshooting - Melitta Caffeo SOLO Guide D'utilisation

14 Troubleshooting

Problem
coffee only runs
drop-by-drop
Coffee does not flow Water reservoir not filled
Grinder does not
grind coffee beans
Loud grinder noise
Bean symbols
are flashing although
the bean container is
filled.
symbol for the valve
lights up out of
sequence
Not enough milk
froth is formed
during the frothing
process
Cause
Grind setting too fine
or incorrectly inserted
Brewing unit obstructed
Beans do not drop into
the grinder (beans are too
oily)
Foreign objects in the
grinder
Foreign objects in the
grinder
Insufficient quantity of
ground beans in the brew-
ing chamber
there is air in the lines
inside the appliance.
the nozzle of the steam
pipe is in the wrong posi-
tion
the steam pipe nozzle is
soiled
Solution
set the grind to a coarser setting
clean brewing unit
Descale if necessary
If necessary, run a cleaning
programme
Fill the water reservoir and en-
sure that it is correctly seated
If necessary open the valve
until water runs out of the ap-
pliance, then re-close valve
clean the brewing unit
tap lightly on the bean con-
tainer
contact the hotline
contact the hotline
Press the button for coffee
dispensing or brewing
strength
if necessary open valve until
water runs out of the appliance
and then re-close the valve.
clean brewing unit
Adjust the nozzle to the proper
position
clean the nozzle
79