Function Settings; Adjusting The Water Hardness - Melitta Caffeo SOLO Guide D'utilisation

11 Function settings

Adjusting the water hardness

use the test strip provided to determine the water hardness in your area. comply with
the instructions on the test strip package. The appliance is factory-adjusted to water
hardness 4. If you have inserted the Melitta
set automatically (see page 55)
Prerequisite: The appliance is ready for operation, the standby symbol
is illuminated.
To maintain appliance quality adjust the water hardness as follows:
•
simultaneously press the button for coffee dispensing
ton for brewing strength
→
the standby symbol
• Press the button for coffee dispensing
for adjusting the water hardness.
→ The symbol for the water filter
•
Press the button for brewing strength
sible degrees of water hardness.
→
Your selection of water hardness in accordance with the table is indicated via
the bean symbols
Water hardness range
1:
2:
3:
4: flashing
claris
®
for more than 2 seconds.
is flashing rapidly.
is illuminated.
in the display.
Properties
soft
medium
hard
very hard
(factory setting)
water filter, water hardness 1 is
®
once to call up the menu
to select between the four pos-
°dH
0 - 7.2 °dh
7.2 - 14 °dh
14 - 21.2 °dh
> 21.2 °dh
and the but-
°f
0 - 13 °f
13 - 25 °f
25 - 38 °f
> 38 °f
63