Procedure For Removing The Trays; Modifying The Tray Number - FAS International FASTER ICE Mode D'emploi

36
E
N
G
L
I
S
H
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
10.3 PROCEDURE FOR REMOVING THE
TRAYS
To replace the tray proceed as follows:

Switch off the machine by means of the main
switch and pull out the power plug.

Open the main door.

Remove the electric connector -A- .

Pull out the tray by overcoming the resistance
exerted by the positioning spring (pull gently).

Pull the tray until it hits the stop, pull it
upwards, rotate it downwards until it is
released from the guide, then finally remove it
from the machine.
To mount a tray proceed as follows:

Insert the tray.

Push the tray until it engages in the locked
position.

Insert the electric connector -A-.

Close the main door.

Energise the machine by means of the main
switch.
10.4

MODIFYING THE TRAY NUMBER

Vending machines with
transformed into machines with 7 trays by
proceeding as follows:

Switch off the machine by means of the main
switch and pull out the power plug.

Pull out all the trays from the vending
machine.

Move the guides det. B (the last one on the
bottom is already in the correct position
consequently it does not need to be moved).

Move the connectors, det. A, placed on the
bottom of the cabinet.

Add a pair of guides.

Mount 7 trays and check that the connectors
are plugged in correctly.

Set the new prices.
FASTER ICE – Issue 00
6 trays can be