Consultation Guide - FAS International FASTER ICE Mode D'emploi

FASTER ICE – Issue 00
1.5

CONSULTATION GUIDE

SYMBOL
ROUTINE MAINTENANCE
Pay particular attention to those parts of the text which are written in bold type, with larger letters or
underlined as these are used to highlight particularly important operations or information.
The enclosed wiring diagrams are intended for use exclusively by specialised technical personnel authorised
by the manufacturer to carry out extraordinary maintenance operations and checks.
It is strictly prohibited to use the wiring diagrams to modify the machine.
Throughout the manual, when referring to the machine, the terms "at the front" or "front" indicate the door
side while the terms "at the back" or "rear" indicate the other side; the terms "right" and "left" refer to the
operator facing the front of the machine.
For each operation to be carried out on the machine, a level of expertise (see below) is given to indicate the
persons qualified to perform the operation concerned.
Final user
Ordinary maintenance
operator
Extraordinary
maintenance operator
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
MEANING
DANGER
WARNING
EXTRAORDINARY
MAINTENANCE
RECYCLING
Person without specific expertise able to perform the operations of purchasing
and retrieving the product only by using the controls displayed on the machine or
by following the instructions given on the display.
Person capable of carrying out the operations in the above point and, in addition,
of operating on the machine following the instructions in this manual marked
with the symbol .
Person capable of carrying out the operations in the above points and, in
addition, of operating on the machine following the instructions in this manual
marked with the symbols
also be capable of operating with the protections disabled and therefore in
reduced safety conditions. Any operations to be carried out with the parts of the
machine in movement and/or on live equipment must only be performed in
exceptional cases and once the impossibility of operating in suitable safety
conditions has been established. Access to these areas should be permitted
only to persons with a practical knowledge and experience of the machine,
particularly in matters of safety and hygiene.
COMMENT
Indicates a danger, even mortal, for the User.
Indicates a warning or notes on key functions or useful
information. Pay careful attention to those parts of the
text indicated by this symbol.
The maintenance personnel are requested to take a
measurement value, check a signal, check the correct
position of any machine element, etc. prior to
performing a determined command or operation.
By routine maintenance, it is intended: the reloading
operations, setting the control parameters, emptying out
the coins, and the cleaning operations in the areas in
contact with the food products.
By extraordinary maintenance, it is intended: the more
complex maintenance
electrical, etc.) in particular situations, or those agreed
with the user which are not considered ordinary
maintenance.
Obligation to dispose of the materials respecting the
environment.
. In each case, the specialised technicians must
operations (mechanical,
5
E
N
G
L
I
S
H