Replacing Brushroll - Hoover PLATINUM Collection UH30010 Manuel D'utilisation

5. GENERAL MAINTENANCE

REPLACING BRUSHROLL

Wh e n To Re pl a ce
WARNING - Risk of personal injury - brushroll may
suddenly restart - unplug before cleaning or servic-
ing. When brushroll brushes are worn, it should be
replaced.
HOW TO REMOVE
BRUSHROLL
5.7
Turn cleaner over
and remove 5
screws as is
indicated by arrows.
5.8
Remove bottom
plate.
5.9
Remove brushroll.
HOW TO REPLACE
BRUSHROLL
5.10
Align new brushroll
and belt.
5.11
Replace brushroll.
5.12
Replace bottom
plate and screws.
10
To check condition of brushes, move the edge of
a card across bottom plate while turning brush-
roll (Fig. 5.6). To maintain cleaning effectiveness,
replace brushroll if brushes do not touch card.
5.7 5.8
5.10 5.11
5.6
5.9
What to Buy
To assure clean-
ing effectiveness,
use only Hoover
B r u s h r o l l
#301428008.
It is important that
you use only genuine
HOOVER
assure your cleaner
5.12
operates at peak per-
formance. To order
bags
www.hoover.com.
HOOVER
can be identified by
the trademark-
®
p a r t
parts to
®
please visit
® bags