Removing Brushroll & Belt; Lubrication - Hoover HUSHTONE CH95413 Guide D'utilisation

Aspirateur vertical sans fil
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Removing Brushroll
CAUTION

LUBRICATION

The motor and brushroll are equipped with bearings which contain sufficient lubrication for their
lifetime. The addition of lubricant could cause damage. Do not add lubricant to motor or brushroll.
1
Slide orange tabs toward center.
3
Remove bottom plate.
20
TO REDUCE THE RISK OF INJURY FROM MOVING PARTS: REMOVE BATTERY BEFORE SERVICING.
2
Slide rear tab back, into
unlock position.
4
Pivot Brushroll out then
remove worn or broken belt,
and replace. Make sure belt is
centered on motor shaft and
sits properly within brushroll
grooves before placing back
into unit.

Publicité

Table des Matières
loading

Table des Matières