Power Nozzle Brushroll Replacement - Hoover SH40050 Guide D'utilisation

power nozzle brushroll
replaCeMent
The belt in your power nozzle drives the agitator. It
has been designed specifically for use in this
cleaner and is important for effective operation.
what to buy
There are other belts manufactured that are similar
in shape and size, but are not designed for the
HOOVER ® power nozzle. Such belts do not operate
the agitator correctly and may create stress which
could damage your power nozzle.
when to replace
WARNING
!
Risk of personal injury - Brushroll may suddenly
restart - unplug before cleaning or servicing.
When Brushroll brushes are worn, it should be
replaced.
3.10 To check condition of brushes, move edge of a
card across Bottom Plate while turning Brushroll. To
maintain cleaning effectiveness, replace Brushroll if
brushes do not touch card.
how to remove
Disconnect cleaner from electrical outlet.
3.11 Turn cleaner over and remove 9 Screws as
indicated in photo.
3.12 Remove Bottom Plate.
3.13 Remove Brushroll.
how to replace
3.14 Align new Brushroll and Belt.
3.15 Replace Brushroll.
3.16 Replace Bottom Plate and Screws.
what to buy: brushroll
To assure cleaning effectiveness, use only
®
Hoover Brushroll part #59143012.
It is important that you use only genuine
®
HOOVER parts to assure your cleaner operates
at peak performance. To order Filters please visit
www.hoover.com.
Actual model may vary from images shown.
3.10
3.12
!
3.14
3.16
11
3.11
3.13
3.15