Install Brushes And Nozzle; Assembly Handle Assembly; Brush/Nozzle Assembly - Hoover FloorMate SpinScrub Mode D'emploi

Assemble handle
Rotate bottom handle support (A)
2
up to the upright position until a
snap is felt.
Align control rod (B) on upper han-
3
dle (C) with slot in bottom handle
support (D).
Push upper handle (C) all the way
4
down until you hear it snap in
place.

Install brushes and nozzle

To install brushes, place handle in
5
upright position. Tilt cleaner back so
that it rests on the floor.
Align post (A) on brush block with hole
(B) on bottom of cleaner. Turn brushes
slightly until post fits easily into hole.
2
A
3
C
B
D
4
C
5
B
A
Continued §
5