Cleaner Assembly; Carton Contents - Hoover SH40050 Guide D'utilisation

Carton Contents

A. Canister
B. Hose
C. Telescopic/Bidirectional Wand
D. Crevice Tool
E. Dusting Brush
F. Power Nozzle
Remove all parts from carton and
identify each item shown.
Make sure all parts are located
before disposing of packing
materials.
ConneCt hose
1.2 Push Hose Connector end (A) into opening
(B) on front of cleaner. To disconnect hose from
cleaner, press release buttons (C) on sides of
Hose Connector and pull out.
IMPORTANT
The flexible hose contains electrical wires for
connection to the Power Nozzle and should
not be used if damaged, cut or punctured.
ConneCt wand
1.3 Push Hand Grip (D)
firmly into end of Wand
(E) until Latch clicks. To
remove Wand from
Hose, press on Wand
Releases Button (F) on
end of Wand and pull
apart.

1. Cleaner asseMbly

1.1
A
1.3
D
E
F
D
1.2
A
C
ConneCt
nozzle
1.4 Push the opposite
end of Wand (G) firmly
into Power Nozzle. To
Release, step on Wand
Release Pedal
and pull to disconnect
from nozzle.
5 Actual model may vary from images shown.
C
b
E
F
b
1.4
(H)
G
H